DwgList

DwgList

General Drawing List

Drawing Title   (No. of  DWG’s.) Drawing Title   (No. of  DWG’s.) Included with each set of  plans
1. Port Plan View
2. Stbd. Plan View
3. Bow and Stern View
4. Deck Hardware Layout
5. Top Interior View
6. Port Interior View
7. Stbd. Interior View
8. Interior Cross Sections(1 to 6)
9. Main/Float Lines
10. Main/Float Displacement
11. Main Hull Construction
12. Float Hull Construction
13. Transom Layout
14. Centerboard Trunk
15. Centerboard Trunk Layout
16. Skeg Construction
17. Skeg Lines (1 to 3) [363/381/421]
18. Camber Patterns [381
/421]
19. Fwd Beam Structure
20. Fwd Beam Frames
21. Aft Beam Structure
22. Aft Beam Frames

23. Hull Beam Intersect [As required]
24. Fwd/Aft Beam Arc Patterns [381/421]
25. Cabin Sole Layout
26. Cabin Sole Dimensions

27. Counter/Seat/Bunks Tops
[381/421]
28. Shelves Layout
  [381/421]
29. Ladder Layout
30. Deck Beams and Hatches
31. Cabin Cockpit Combing

32. Wash Board Detail [As required]
33. Companionway Detail
[As required]
34. Pulpit Layout
35. Pushpit Layout
36. Main Traveler Bridge
[363/381/421]
37. Centerboard Pendant Tube
38. Trampoline Spar Layout
39. Rudder Stock Layout
40. Rudder Head Patterns
[363/381/421]
41. Rudder Foot Patterns
[363/381/421]
42. Keel/Rudder Layout
43. Keel Lines(1 to 3)
44. Rudder Lines(1 to 3)
45. Keel Plate Pattern
[363/381/421]
46. Rudder Plate Pattern
[363/381/421]
47. Chainplate Layout
48. Anchor Roller/Chainplate
49. Anchor Roller Pattern
[363/381/421]
50. Mast Rigging Layout
51. Mast Step [301]
52. Sail Layout Dimensions
53. Main Sail Layout
54. Working Jib Layout
55. Storm Jib 40 Layout
56. 120 Genoa Layout
[301]
57. 150 Genoa Layout
58. 180 Genoa Layout
[301]
59. Electrical Plan
60. Plumbing and Drain
61. Propane Installation
[As required]
62. Engine Installation
[As required]
63. Refrigeration Detail
[As required]
  • All drawing marked in Blue.
  • Design manual, containing table of offsets for all surfaces, engineering data and Design Specs.
  • Field consultation on construction
  • Computer software for viewing drawings, sections and all design data.

  • Sail layouts can be designed for different, percentage of fore-triangle, camber and wind velocity.
  • Pattern templates are supplied for all metal work.
  • Full size patterns are supplied for the rudder, keel and skeg.
  • Supplied software allows measuring any line or dimensions, determining areas and their centroids, viewing any cross section bow to stern.
  • All designs can be built in modules, transported  and assembled at the coast. The beams, hull structures and  interior are completed, then transported and assembled.
Click <Back Arrow to return  or select from Site Map above.

  

(Abbreviations)  (Builders) (Engineering reference)  (Sailcloth selector)  (Typical Drawings)
Contact Webmaster with any questions concerning this web site.
Last modified: October 15, 1999